Before you begin, have your Base station and AIR-INSITE data loggers to hand.  Power up your BASE STATION, connect it to the internet and follow these steps...


Step 1: Logger to Base

 

On your Base station press the DOWN button to scroll / find the 'Loggers to Base' (L2B) menu.  Press ENTER.  Next, Press the Bluetooth button on all of the AIR-INSITE data loggers (in this example there would be 5). Once data from a AIR-INSITE data loggers has successfully transferred you will see a green check mark on the respective AIR-INSITE data logger icon.  With all files transferred all data logger icons will feature a check mark. Additionally, in the right top corner of the 'Logger to Base'  menu (L2B) a check mark will display.  You've successfully transferred data from your AIR-INSITE data loggers to a AIR-INSITE Base station.


 

Step 2: Base to Cloud

  

Press the DOWN button to scroll / find the 'Base to Cloud' (B2C) menu and press ENTER.  When the AIR-INSITE Base station has finished uploading all audit data to AIR-INSITE, you will see a green check mark in the right top corner of the 'Base to Cloud' (B2C) menu icon. 


Progress of the above steps can be observed on the www.air-insite.com website. Click 'Audit Wizard' and then select your audit.  Once selected you'll be re-directed to the Audit Wizard 'transfer data' view screen. It will show the 'Logger to Base' and 'Base to Cloud' steps in green (instead of grey) when completed.